Difference between revisions of "EHRs FM Profiling Tool"
|Line 80:||Line 80:|
===Export during the development process===
===Export during the development process===
===Final deliverable phase 1 May 2013===
===Final deliverable phase 1 May 2013===
Revision as of 11:23, 7 March 2017
- 1 EHR-S FM Profile Designer Tool
- 2 How to create a Functional Profile
- 2.1 How-To Guide
- 2.2 Manuals
- 2.3 Browse and search
- 2.4 Create a Functional Profile
- 2.5 Edit the Functional Profile
- 2.6 Export during the development process
- 2.7 Frequently asked questions, FAQ
- 2.8 Final deliverable phase 1 May 2013
- 2.9 Phase 2 September 2013
- 2.10 Phase 2 Work-In-Progress Artifacts
- 2.11 Phase 2 Deliverables
- 2.12 Phase 2 Update April 3th 2014
- 2.13 Phase 2 Update May 12th 2014
- 2.14 Phase 2 Update September 22th 2014
- 2.15 Phase 2 Update End October 2014
- 2.16 Requirements for webpage to store EHR-S FM artifacts November 2014
- 2.17 Phase 2 Update December 2014
- 2.18 Past Activities
- 3 Current Functional List
- 4 Listserv
- 5 Additional Work
EHR-S FM Profile Designer Tool
The HL7 EHR Work Group developed the EHR-S FM from which Functional Profiles can be derived. For both the management of the Functional Model and the Functional Profiles and the development of Functional Profiles, a tool is developed: the EHR-S FM Profile Designer Tool. The tool is built as an extension to Enterprise Architect from Sparx. The tool works with the Corporate Edition of Enterprise Architect. when someone wants to develop a Functional Profile from the EHR-S FM with the use of the tool, he needs Enterprise Architect, the extension EHR-S FM Designer Tool, and the computable artifacts to do so.
The Read me chapter, as a deliverable of the tooling project gives an overview of all the artefacts that were developed. Although it is outdated (versions) it still gives an overview EHR_S_FM_TOOL_C0_ReadmePhase2_v1.1.pdf
Sparx has several tutorials of how Enterprise Architect works. For the EHR-S FM Designer Tool several manuals were developed. These manuals and the -How-To-Guide-, this guide describes how to create a Functional Profile, can be found on this wiki.
The wiki still contains a lot of project information from the past. This content will be removed in the coming months as the wiki will get a different purpose.
Project a summary
This project, sponsored by the HL7 Tooling Workgroup and co-sponsored by the EHR Workgroup, produced a desktop tool to create EHR-S FM Functional Profiles (starting with the EHR-S FM R2), with enforced profiling rules, and exports as documents, support for and XML interchange format for reuse across profile tool instances or for use in other tools. The Project Scope Statement can be found: HL7 Project Scope Statement - EHR-S FM Profiling Tool.doc The project scope statement was approved by the EHR and Tooling Workgroups in November 2011. The tool is part of the HL7 suite of tools.
Although the project was targeted for the EHR-S FM R2, the goal is to target the PHR-S FM also beginning with the PHR-S FM R2.
The method of creating EHR-S FM Functional Profiles, using unstructured tools (spreadsheet, text processor), did not enforce moderately complex rules for creating EHR-S FM Functional Profiles leading to a very laborious manual effort that is prone to errors. Furthermore, the methods used in the past did not easily provide methods for building on top of, merging, or updating existing profiles. These challenges were proved to be significant barriers in the use and adoption of the EHR-S Functional Model.
As said in the Introduction, the EHR-S FM Profile Designer Tool is built as an extension on Enterprise Architect and works with the Corporate Edition. In the same time, a project for MAX was running. Although MAX itself was out of scope the project team decided to use MAX as export format for this work, hence facilitating publishing work group as well. The MAX extension that was built is needed for certain functionality when creating a Functional Profile with the tool. Summarized, someone needs Enterprise Architect, corporate edition, The extension EHR-S FM Profile Designer Tool and the MAX extension. At this moment (2017-07-03) both extensions and all the computable artifacts are available for HL7 members only and can be obtained by contacting the EHR WG co-chairs (http://www.hl7.org/Special/committees/ehr/leadership.cfm).
More general information on how to create Functional Profiles and the manuals for the tool can be found on this wiki.
Summary of the status March 2017
How to create a Functional Profile
The ‘How-to Guide’ offers guidance for using the EHR-S FM Profiling Designer tool to create functional profiles that conforms to the HL7 EHR-S Functional Model (denoted hereafter FM). A conforming functional profile is one that adheres to the rules specified in the FM Conformance Clause, (Section 6). Please note that the ‘How-to guide’ is not a replacement for the Conformance Clause. You are encouraged to read Section 6 carefully. For the remainder of this section, the term profile will be used as shorthand for functional profile.
The guide offers guidelines — not binding directives. It will walk you through the basic steps involved in creating a conforming functional profile, including the development of a conformance clause and conformance criteria. The How-to Guide offers a few general principles to keep in mind as you create the functional profile. Also, it provides guidance on how and why you should consider balloting the profile you created. It assumes that you are familiar with the FM and are knowledgeable about the requirements associated with a particular EHR-S healthcare delivery setting. The guide can be downloaded here Media:How-to_Guide_R2_final.pdf
The EHR-S FM R2 standard is published as a pdf on the HL7 website and is available for everyone. The ERH-S FM is also published in html, csv, max.xml and as an eap. file, this is the file Enterprise Architect can use. As said before, these files are only available for HL7 members at this moment. How to create a Functional Profile with the tool and the use of the max.xml file is described in several manuals. The manuals follow the logical steps you have to take when creating a Functional Profile.
Browse and search
To browse and search in the EHR-S FM R2 you need the eap. file of the FM that Enterprise Architect, EA, can read. With EA you can open the EHR-S FM, you can browse through the FM and read all the components of the FM. You can do this even if you are not creating a Functional Profile with the tool. The manuals created for this functionalities are Read the EHR-S FM (Media:ReadtheEHRSFM.pdf) and Search the EHR-S FM (Media:SearchEHRSFM.pdf).
Another functionality that can be used is looking at the traceability of elements in the EHR-S FM. In the EHR-S FM there are different relationships between the elements. The Traceability window in EA enables you to quickly see how elements, headers, functions and criteria in the functional model or functional profile, are connected and how they influence each other. How to use this functionality is described in the manual: Media:TraceabilityElements.pdf
Create a Functional Profile
A new Functional Profile is based on a Base Model. This can be the EHR-S FM (started with Release 2.0) or an existing Functional Profile (based on the EHR-S FM R 2.0). From the Base Model a Profile Definition is defined. After defining the Profile Definition the new Functional Profile can be compiled. In an Introduction chapter, the design of the EHR-S FM Profile Designer Tool is described 0Introduction.pdf
In the manuals 1 to 9 the creation of a Functional Model based on the EHR-S FM is described.
1. Create a new project for a new Functional Profile
- The first step in the creation of a new Functional profile is the creation of a new project in Enterprise Architect, EA. The manual describes how to do this. Media:1CreateNewProfile.pdf
2. Load a Base Model for creation of a new Functional profile
- The first rule for Functional Profiles is the identification of the Functional Model or Functional Profile from which you want to derive the new Functional Profile. This is the called ‘Base Model’. To do so you have to select the FM or FP for that and load the FM or FP into Enterprise Architect 2LoadBaseModel.pdf. To do so you will need the MAX file of that FM or FP. Be sure that you use the latest version of the MAX file! Ask the EHR WG co-chairs for the file.
3. Create package for (compiled) Functional Profile
- The third step is the creation of a package (EA Term) for the new Functional Profile. In the 0Introduction chapter, this is represented in figure 2 and 3. 3CreatePackageforFP.pdf
4. Provide General Information
- A basic requirement of all functional profiles is to unique identify and to convey general information about the Functional Profile. This needs to be done in EA otherwise, you cannot make a Profile Definition 4ProvideGeneralInformation.pdf. However, the general information on the functional Profile is usually described in an Overview chapter that is published together with the Functional Profile itself.
5. Create UML model for the new Functional Profile
- For the Profile Definition, you need to create a UML model in where is shown how the Profile Definition, the Base Model and the actual new Functional Profile relates to each other. This needs to be done so everything you define form the Base Model is included in the Profile Definition. And of course, everything that is defined in the Profile Definition is included in the actual new Functional Profile 5CreateUMLmodelNewFP.pdf. Figure 3 in the 0Introduction chapter shows you how this UML model looks like.
6. Create the Functional Profile definition
- The base for the new Functional Profile is the Base Model, FM or FP. The Profile Definition for the new Functional Profile is based on that Base Model 6CreateProfileDefinition.pdf. In this manual is also described how to lock the Base Model to prevent you for making changes in the Base Model instead of the Profile Definition.
7. Create the Compiled Profile
- The base for the new Functional Profile is the Profile Definition 7CreateCompiledProfile.pdf.
8. Validation of Profile Definition and Compiled Profile
- All the rules for Functional Profile creation were included in the EHR-S FM FP Designer tool as validation rules. Running a validation will give you a report on errors and warnings on the work you have done on the Profile Definition or the Compiled Profile 8Validation.pdf.
9. Running Functional Model and Functional Profile Publication
- Once the Functional Profile has been created, you will want to publish the specification for others to use. For the creation of the publication, you need the Model Automated eXchange (MAX) file of the Compiled Profile. This MAX file is an output of the Enterprise Architect (EA) EHR-S FM FP Designer Tool. In this manual guidance is given on how to create the publication from the MAX file. In the process of creating the publication, different software is used. Which software and where to find it is described in the manual 9CreatePublication.pdf.
Edit the Functional Profile
The Functional Profile inherits functions and criteria from its Base Model and serves a certain purpose, e.g Domain. For this purpose the functions and criteria can be changed in a more precise description or examples applicable for that purpose can be added. Also, there can be a need for adding criteria in existing functions or even adding functions in the Functional Profile. The functionalities for this are described in the following manuals.
Adding EHR-S FM components
- This manual describes the way new components, sections, headers, functions and/ or conformance criteria can be added to a Functional Profile with the support of the EHR-S FM Profile Designer Tool AddingEHR_S_FMFPcomponents.pdf.
Working in a project on a new functional profile
- The development of a new Functional Profile is usually done in a multidisciplinary project team. Depending on the part of the Base Model, domain expert, IT experts, security experts etc, are part of the project team. Collaboration of the project team can be done with or without using Enterprise Architect HL7 EHR-S FM Extension. Several option are described in the manual CollaborationFunctionalProfile.pdf.
Moving EHR-S FM Components
- This document describes the way components, sections, headers, functions and/ or conformance criteria, of the EHR-S FM can be moved MovingEHR_S_FMFPcomponents.pdf.
- The development of a new Functional Profile is usually done in a project in where several parties are involved. Support for the project management can be done with several tools. As a project facilitator, you can contribute to project management by using Enterprise Architect, EA. In this context, it is important to determine what of the project management is done by the project leader, in another tool then EA, and what by the project facilitator, done in EA ProjectManagement.pdf.
- During the development of the tool people with the experience of creating a new Functional Profile asked for the requirement of the possibility to track changes in the Profile Definition TrackingChanges.pdf. See for a detailed description of how to create a Profile Definition chapter 6CreateProfileDefinition.pdf.
Export during the development process
Frequently asked questions, FAQ
Final deliverable phase 1 May 2013
This summary describes the final deliverables for this phase 1 work on the creation of tooling for the EHR-S FM. The deliverables are listed in the table below. However, all the files you can find on GForce: http://gforge.hl7.org/gf/project/ehrsfm_profile/frs/
|Deliverable||File Description||File Names||Content|
|User guide||Reader’s Guide||EHR_S_FM_TOOL_C0_Readme.pdf||Description of the EHR-S FM Tool Release 1 package content and files.|
|User guide||Chapter One: Overview||EHR_S_FM_TOOL_C1_Overview.pdf||Background. Purpose & Scope.
Overview and Design of the EHR-S FM. Tool. Anticipated Uses.
|User guide||Chapter Two: Installing the extensions||EHR_S_FM_TOOL_C2_Installing the extension.pdf||Description of the import of the EHR-S FM in the Tool. Description how to handle the Enterprise Architect extension.|
|User guide||Chapter Three: Import & Export||EHR_S_FM_TOOL_C3_Import&Export.pdf||Description of how to import the EHR-S FM XML and the MAX file. Description of how to export the EHR-S FM from the Tool into MAX format|
|User guide||Chapter Four: Manage||EHR_S_FM_TOOL_C4_Manage.pdf||Description of how to manage the components of the EHR-S FM.|
|User guide||Chapter Five: Ballot||EHR_S_FM_TOOL_C5_Ballot.pdf||Description of how to use the EHR-S FM tool for ballot purposes.|
|User guide||PowerPoint presentation with instructions||EHR_S_FM_UserGuideManage.pdf||Print screens with instructions of how to work with the EHR-S FM Tool.|
|EHR-S FM in EA||Enterprise Architect explanation file with EHR-S FM in UML||Design Sheets from EA (2013-May-24)v5.pdf. EHR-S FM Tooling Design.eap||This pdf file contains the following UML
diagrams: EHR-S FM R2 spreadsheet to XML schema. Mapping of EHR-S FM R2 XML schema to UML Meta Model. UML Meta Model 3.4 EHR-S FM R2. UML representation of EHR-S FM, first draft. Glossary mapping. The files are developed in a separate EA file which has these diagrams in design mode.
|Validation||Validation rules spreadsheet with rules used to develop the EHR-S FM tool||ValidationRulesEHR-SFMR2-20130520-AS.xls||Description of all the validation rules that are used to develop the validation process|
|Publication||EHR-S FM R2 export in MAX format||EHRS_FM_R2 (import v2013-mar-29)-full.max||An export of the EHR-S FM R2 in MAX format. The import refers to the May 2013 ballot master spreadsheet that is the basis for this.|
|Extra||XML Generator for EHR-S FM spreadsheet||EHR-S FM_R2_XML-Generator.zip (named .zap, rename to .zip to extract)||During the creation process of the EHR-S FM Tool, the project team encountered some issues with the existing XML file from the May 2012 ballot. This was the reason to create a standalone tool that allows generating a full XML file from the Excel spreadsheet for EHR-S FM.|
|EHR-S FM in EA||EHR-S FM Extension||EHRSFM_EA_Extension.Setup (2013-may-27).msi or EHRSFM_EA_Extension.Setup (2013-may-27).RENAME_to_msi||The EHR-S FM Extension to EA as an .msi file. This is the tool. Some websites do not allow storage as .msi, so it is often .RENAME_TO_msi.|
|EHR-S FM in EA||EHR-S FM Content for Enterprise Architect||EHR-S FM R2 (@GForge v2).eap||The EHR-S FM content in a for Enterprise Architect readable file (eap file). This is a ready to go file, preventing that every user should import the full.max file themselves.|
|Publication||XSLT for MAX to HTML||max2html.xsl, functional-model.css, functional-model.scss, ehr-s-fm-ballot.mif||XSLT stylesheet for the html publication of the EHR-S FM export in MAX output from EA. With Cascading Style Sheet and SCSS source file for it. The ballot MIF file adds the ballot details, cochairs and copyright statements to the html and pdf publication.|
|Publication||XSLT from MAX to FO to PDF||max2fo.xslt, ehr-s-fm-ballot.mif, EHR-S-FM_R2-rom-max.pdf||An XSLT stylesheet that allows the conversion of the html to FO and from there into PDF. The MIF contains the ballot details. The pdf with the browsable content list is the result.|
|Validation||Validation testing of EHR-S FM via XML artifacts||fm-max-validation-test.xml, FM-validation.sch, fm-validation.xslt, Validation output (2013-apr-18).txt||Set of files that validate the FM using the MAX export and external validator. The validation report is send back to the user in the EA interface. The txt document is an example of output. Every rule is tested with a pass / fail result.|
|All tooling parts||Source code for the EHR-S FM Extension||HL7 SourceCodeEHR-S FM Tool (2013-may-27).zip||This contains the visual studio 2010 C# source code for the solutions and the projects. And the MAX materials.|
|Publication||Publication documents generated from the EHR-S FM tooling output in html and pdf||EHR-S-FM_R2-from-max.html, EHR-S-FM_R2-from-max.pdf||The EHR-S FM in a html format generated from the MAX export coming from Enterprise Architect. It uses a Cascading Style Sheet. The Excel is a simple open the XML file. This creates a 35375 line long Excel.|
Phase 2 September 2013
Phase 2 is started, the contract is finalized. So we continue working on the EHR-S FM Tool according to the PSS. This PSS was accepted and distributed in the EHR WG. We are working on the first deliverable as presented in the conference call of September the 10th. this first deliverable is a Requirements analysis (Deadline September 30th). An analysis of the How to Profile guide and the Conformance Clause was carried out (need to update with the new document for the ISO ballot). From there we are developing Use Cases, Activity diagrams and Requirements. A first presentation and discussion of this was presented in the conference call. Next week there will be a follow up. Some examples: Note: this is work in progress, so CONCEPT!
Upcoming HL7 WGM in Cambridge On Monday Q4 we will give a demo of the EHR-S FM Tool, the status as it is now. Also will we give an introduction into phase 2 of the Tooling project. We want to have a discussion on the requirements, maybe in a focus group during the week. In this way we can make the deadline of September 30th.
Questions asked and activities for us:
- Requirements for combining, merging and comparing profiles.
- How to assign parts of the functional profile to different people? Export as xmi file, make an .eap file? It is possible to split the work.
- How to use the tool to capture feedback?
- Developing the tool there will be different roles: a reviewer who can read only the profile (or a part of the profile) and add comment in a comment section. Another role is the editor role who can make the actual changes in the functional profile.
- It will be important to track and trace changes in the profile.
- there are novice and expert users. For the novice user it might be best to have default settings that makes it easy to profile.Creating a Toolbox sounds great.
- How to use the Glossary in the creation of a profile? The EHR-S FM Glossary stays as it is. An update will always be done by a ballot process. If the profile uses new terms than there will be a kind of extension of the original glossary. In an update of the original glossary there will be a review of the extensions. How to make and handle an extension?
- How to update the glossary after a ballot?
- Do we need a running server for Team Review in EA (question of Stephen)? Not necessary, but role base access should be handled on file level? How to deal with this?
We continue working. Michael reviewed the work of Anneke on Friday September the 13th. This file is the first draft which will be discussed Tuesday 17th September in the conference call and finalized during the WGM. Add a new file on Monday the 16th of September in the afternoon (Our time). Differences are:
- Changed the High Level Use Cases;
- Added the following Use Cases, Activity diagrams and Requirements: Profile Combining, Profile Comparing, Profile Merging, Profile Views.
- Not done yet, needs discussion: Profile Balloting and Profile Rendering.
- Deleted working in a Team: is a functionality of EA. If someone wants to use that in the process of Profiling, this is possible.
Phase 2 Work-In-Progress Artifacts
All WIP artifacts can be found here: https://app.box.com/s/938b1c1wuprl52nbpazk
- Enterprise Architect Tool Phase 2 Design file (EAP)
- Generated Document from the Design (RTF/DOC)
- Validation Rules (XLS)
- Questions for the EHR WG
Phase 2 Deliverables
It is December the 3th and almost the end of 2013. This description is to give you an update of phase 2 of the EHR-S Tooling project. The project team worked together with the EHR WG on the deliverables described in the PSS. Last Friday, November the 29th we had a meeting as a project team and discussed how to actually build the profiling tool and how the steps in Enterprise would look like. We made a presentation with mockups and published this on Box (the link you can find in Phase 2 Work-in-progress Artifacts.
The deliverables until now are; 1. The requirements (deliverable 1 in the PSS): this is approved by both the EHR WG and the Tooling WG. 2. Validation Rules (deliverable 2 in the PSS): this is approved by both the EHR WG and the Tooling WG. 3. The types of profiles (deliverable 3 in the PSS): this is apporved by both the EHR WG and the Tooling WG. 4. Profile Views (deliverable 4 in the PSS): this is approved by the EHR WG.
All the deliverables can be found on GForge http://gforge.hl7.org/gf/project/ehrsfm_profile/docman/
Phase 2 Update April 3th 2014
We are busy to implement the requirements that are needed for the creation of a FP with support of the tool. The two examples that we are using for this implementation are RM_ES FP and the MU FP. Both eap files are on box; https://app.box.com/s/938b1c1wuprl52nbpazk If you install the latest version of the extension, HL7_FM_EA_Extension 20140328-4.msi, you can open the eap file and look at the model of the FP's. If you want you can play with this.
How to install the extension is described in EHR_S_FM_TOOL_C2_Installing the extension_v01.pdf
You will also find some content for the learning center in EA; https://app.box.com/s/oetxahgb9k4emgveaodh For now these are pdf documents you can consult for working with the tool at this moment. Before the end of April we will include them in the learning center of EA.
NOTE: we asked for an extension on the deliverable date (of March 31th) and the WG agreed with this.
Phase 2 Update May 12th 2014
All the basic requirements for the development of a functional Profile are implemented in the EHR-S FM Profiling Tool. The latest version of the msi extension is HL7_FM_EA_Extension 20140429. The RMES FP and the MU FP were used to implement the requirements and to test the tool. As always work in progress can be found on box: https://app.box.com/s/938b1c1wuprl52nbpazk Meanwhile we delivered the next deliverables to HL7 International after approval by both the EHR WG and Tooling WG. These deliverables can be found on GForge (after you logged in): http://gforge.hl7.org/gf/project/ehrsfm_profile/docman/Phase2Deliverables6/
At this stage the tool can be used to develop a new Functional Profile based on the EHR-S FM R2.0. How to use the tool for that can be found in the user guides also on GForge, but also in the Learning Center in EA (can be consulted after installing the extension). However, the tool is still in development, so changes will be made in the upcoming weeks. Changes are improvement of the implementations in the tool, it can happen that there are still bugs in the tool. These improvements will not effect your work. Other changes concerns further implementation of the requirements. We are working on the requirements for combine, compare and merge functionalities. Use case for this is the PHFP. These further implementations will not effect your work.
If you want to use the tool for the development of your functional profile please contact the EHR WG and we can plan a meeting in where we can give you instructions in how to start using the tool.
Phase 2 Update September 22th 2014
As described in the May update all the basic requirements for the development of a Functional Profile were implemented in the EHR-S FM Profiling Tool. Four significant steps were made since then: 1. The Meaningful Use Functional Profile (MU FP) was created for the August 2014 ballot. 2. HL7 Italy uses the tool for the creation of their Realm Functional Profile. 3. The publication tools and format were developed and used to publish the MU FP and the EHR-S FM for ISO. 4. Started the implementation of the Combine, Compare and Merge functionality.
Several issues on the tool and on the rules of creating Functional Profiles were detected while working on the MU FP. All issues detected were included in GForge and fixed in the tool. Also HL7 Italy detected these issues and had issues in the context of using the tool for the development of a Realm Functional Profile. The last ones will be addresses in phase 3 of the tooling project.
The publication format, tools for that and the steps of how to create a publication were developed and used. A final user guide will be available on Box soon: https://app.box.com/s/v4so451jerv1xicshyox
For the Combine, Compare and Merge functionality we discussed the requirements and a mockup based on this requirements with the Public Health Functional Profile team. A first (partly) implementation was discussed in the regular EHR WG conference call and showed during the WGM in Chicago. The current implementation status and the direction to finish it were approved by the EHR WG.
Also the user guides were updated and included in the EA Learning Center and uploaded to box: https://app.box.com/s/oetxahgb9k4emgveaodh . A tutorial presentation was created and used for the hands on sessions during the HL7 WGM in Chicago.
In the hands-on sessions there were some problems with the tool. One of the problems was related to version 11 of Enterprise Architect (EA). Some participants had this version installed and couldn’t see the costumed learning center and toolbox. However, some had no problems with that. We will investigate what the reason for this is. Some participants worked with the trail version of EA. Working with this version is not a problem, but saving the work is not possible. For the tutorial in January 2015 we will come up with some pre-requisites because of the experiences from the hands-on sessions.
As described before, all work in progress can be found on Box: https://app.box.com/s/938b1c1wuprl52nbpazk. The latest version of the msi extension is HL7_FM_EA_Extension v2.14.0915. Also the user guides can be found on Box: https://app.box.com/s/oetxahgb9k4emgveaodh
If you want to use the tool for the development of your functional profile please contact the co-chairs of the EHR WG.
Phase 2 Update End October 2014
In the EHR WG conference call the following motions were approved:
Motion 1. Electronic Health Record Workgroup is asked to accept an extension of 4 weeks for deliverable 12. Combine, Compare, Merge. Additional guidance and tool formatting to support profiling tasks such as comparing profiles, comparing functions, merging functions and criteria from separate profiles. The Results 4 Care team used a mock up design and had further discussions with EHR WG members for the functional requirements. The work is significant more difficult than anticipated. We are making progress, but might not make the deadline of Oct 31. The EHR WG approved an extension of one month (November the 30th) to finish the implementation of the combine, compare and merge functionality.
Motion 2. Electronic Health Record Workgroup is asked to accept deliverable 10: support the work process of profile creators.
Motion 3. Electronic Health Record Workgroup is asked to accept deliverable 11: Publication artifacts for EHR-S FM profiles using HL7 MAX approach.
Motion 4. Electronic Health Record Workgroup is asked to accept deliverable 14. Update reports and wiki contributions.
Motion 5. Electronic Health Record Workgroup is asked to accept deliverable 16. Tutorial presentation (i.e. pptx) for the profiling tool.
Motion 6. Electronic Health Record Workgroup is asked to accept deliverable 17. Provide initial support to key WG users in installing and initial use of tool.
See for more detail the minutes of the EHR-WG conference call.
In order to store all the materials of the EHR-S FM FP Designer Tool Results 4 Care proposed to develop a webpage which can be placed behind the member login of the HL7.org website. On this site the user guides and software can be stored and obtained by HL7 members. An example webpage was developed based on the FHIR webpage of HL7 International. How, by whom etc. will be discussed with HL7 headquarters.
In the meantime all the final materials can be obtained by contacting the EHR WG co-chairs: http://wiki.hl7.org/index.php?title=EHR_Leadership Note: Box is no longer up to date with the latest materials.
Requirements for webpage to store EHR-S FM artifacts November 2014
The purpose of this webpage is to store artifacts in the context of the EHR-S FM FP Designer tool. So it is not the purpose to store the HL7 standard itself, but files the user need to use the tool.
For the development of the webpage requirements are needed. We will collect the requirements on this wiki during the discussion about the requirements.
- Provide the user interface to:
- the extension/ the EHR-S FM FP Designer tool.
- the installation guide of how to install the Extension.
- the user guides of how to use the tool.
- the max file of the EHR-S FM R2, latest version.
- the max files, Profile Definition and Compiled Profile of the Functional Profiles.
- the eap file of the EHR-S FM R2, latest version.
- updates on the extension and user guides.
- a Forum in where users can discuss the functionalities of the tool and/or their experiences with the tool.
- history of the development progress of the extension.
Phase 2 Update December 2014
Phase two of the EHR-S FM Profile Designer tool has ended. All the deliverables were delivered in time. In the conference call of the EHR WG the following motions were approved.
'Motion 1.' Electronic Health Record (EHR) Workgroup and Electronic Services and Tools (EST) Workgroup are asked to accept deliverable 12. Combine, Compare, Merge of the Profile Designer Tool. Additional guidance and tool formatting to support profiling tasks such as comparing profiles, comparing functions, merging functions and criteria from separate profiles. The Results 4 Care team used a mock up design and had further discussions with EHR WG members for the functional requirements. The work took significant more time and energy than anticipated. However, through breaking it down in smaller steps it became possible to continue the work and achieve a working system allowing handling both mergers on profile level, and on individual criteria, based on a component illustrating the differences between profiles. The current set of comparable profiles in one session is 3, which is one more than the required 2 according the original plan for phase 2. It is still possible to combine more through iteration of the process. The msi file containing this functionality is placed in EHR co-chair Dropbox and in Gforge. The materials are available at http://gforge.hl7.org/gf/project/ehrsfm_profile/docman/FinalDeliverablePhase2/ Please note that some validation files and source code materials are in the SVN.
Motion 2. Electronic Health Record Workgroup and Electronic Services and Tools (EST) Workgroup are asked to accept deliverable 13: Final testing of all tool components of the Profile Designer Tool. The deliverables 1 – 12 will be tested by the EHR and the Tooling workgroup. The EHR WG has been testing the tool through the actual development of FM ballots and FP ballots. These can be seen as acceptance testing of the overall functionality. Many issues and bugs were reported and have been handled by the R4C team. Further, we have created a unit test, and tested the various components. A set of test reports is available. The final test report is placed in EHR co-chair Dropbox and in Gforge. The materials are available at http://gforge.hl7.org/gf/project/ehrsfm_profile/docman/FinalDeliverablePhase2/
Motion 3. Electronic Health Record Workgroup and Electronic Services and Tools (EST) Workgroup are asked to accept deliverable 15. Final User Guide set for profiling using the Profile Designer Tool. The R4C team created a range of user guides, one for each significant step in the whole process from starting a project to finalizing the publication. Each user guide has been reviewed by EHR WG members and many have been used during the various demonstrations, workshops, and other events. The set is ready and delivered to the co-chairs due to the copyright arrangements. The last one is about the combine, compare and merge functionality and handed in together with the new tool version that includes this functionality. In addition, R4C created a learning center for the tool using basic EA functionality, and stored the user guides on our server. We created a website with the recent FHIR look and feel to allow HL7 to place both the access page to the learning center plus all user guides and other documentation behind the secure site for members only. HL7 is currently working on the final publication site for members only. The user guide and documentation set is placed in the EHR co-chair Dropbox and Gforge The materials are available at http://gforge.hl7.org/gf/project/ehrsfm_profile/docman/FinalDeliverablePhase2/
We still need approval of the EST WG.
- Creation of an EHR Tooling list - Helen
- Invite Profiling SMEs - John
- EHR-S FM Chapter 2 -> Link ???
Current Functional List
The following list contains all thus far identified functionality in general order of priority (greatest to least)
Input (not specific to this project, but defined through from EHR-S FM development and publication)
- EHR-S FM R2 source in XML
Absolute Functionality (Top Priority)
- Enforce profiling rules (per Conformance Chapter)
- Include/Exclude functions from profile
- Conformance Optionality
- Conditional Criteria
- Criteria Inheritance
- Add functions and criteria
- Modify functions and criteria
- ... (Other absolute profile rules)
- output formats
- Browse & Navigation of the funtional model
- search capabilities, filtering capabilities, keyword search, search & replace.
- Tool is framework specific (e.g. coded to EHR WG FM framework specifications), but content in-specific (enables the import/export of different conformant models/versions (e.g. EHR-S FM 2, future PHR-S FM). (Tool is content agnostic)
- Save profile
Needed Functionality (High priority)
- Ability to revert to previous state (undo)
- Simple text copy paste (text editor related)
- Text formatting (highlight, bold, underline, font, italicize
- Show dependencies between functions/criteria
- Show impact of changes
- Undo changes
- Capture comments regarding specific elements (i.e. comments regarding specific functions or criteria)
- Initialize/revert to conformant base standard (clear old comments, reset to clean restart to new version activity)
- Ability to link functional model/profile (intra/inter base standard and profile, linked to a conceptual model, bi-directionally)
Operative Functionality (Medium Priority)
- Output format HL7 HTML publication format (i.e. to publish through HL7 Publishing)
- Generate publication ready documents.
- Attach front-matter to publication. Chapter 1 (Additional material
- Maintain original for comparison with modified function/criteria
- Compare to other profiles
- Merge Functions/Criteria from separate Profiles
- Export Sections from Master or working copy
- Function copy paste
- Balloting & reconciliation traceability version control
- Managing voting and input from reviewers.
- Reporting out all comments against an element.
- Capturing institutional memory "allow for comments/notes" attached to elements.
- converting a profile from one version to the next.
- If you have a profile based on R2.0, have the tool update baseline profile to R2.1 as starting point.
- Requirements regarding tooling access (online)
- Support multi user - multiple users working on same profile at same time?
- User Management, access control
- Workflow management tool (assigning activities to users)
Additional Functionality (Low Priority)
- mobile access
- Note - will not support R1.1. Is it necessary to convert R1/R1.1 to R2?
The EHR-S FM Profiling Tool Project is currently being set up.
To subscribe to a list service, please go to the HL7 Listservices Welcome Page
Make the FM available in UML for incorporation in UML Modeling & Design. Used with the EHR FIM, see EHR Interoperability WG. The mapping is for R2 now as work in progress for the EHR-S FM tool part phase 1. See first picture below. An earlier version for R1.1. has informed the work for R2. See 2nd picture below.