Back to Harmonization of Health Quality Information Models Page
The CQI Workgroup reviewed this page in April 2018 consistent with QDM version 5.3. There are no updates to the content required based on QDM version 5.4 (reviewed June 7, 2018). Note that while the QDM categories Intervention and Procedure are modeled identically and interoperability standards do not differentiate between them, both are retained in the QDM as they are more clinically expressive for clinicians to understand the measure intent.
QDM defines Intervention as a course of action intended to achieve a result in the care of persons with health problems that does not involve direct physical contact with a patient. Examples include patient education and therapeutic communication. QDM defines three contexts for intervention: Intervention, Order; Intervention, Performed; Intervention, Recommended.
Intervention, Order
| QDM Attribute
|
QI Core Metadata Element
|
Comment
|
| Intervention, Order
|
ProcedureRequest.intent
|
Procedure Request intent uses the concepts proposal, plan, order, original-order, reflex-order, filler-order, instance-order, option. Constrain to "order" from the intent value set for QDM datatypes with the order context.
|
| Negation Rationale
|
ProcedureRequest.extension (http://hl7.org/fhir/StructureDefinition/procedurerequest-reasonRefused)
|
QDM matched to QI Core / FHIR
|
| Reason
|
ProcedureRequest.reasonCode
|
QDM matched to QI Core / FHIR
|
| Author dateTime
|
ProcedureRequest.AuthoredOn
|
Note - ProcedureRequest.occurrence(x) defines a dateTime when the event should occur - not addressed in QDM
|
| Code
|
ProcedureRequest.code
|
QDM matched to QI Core / FHIR
|
| id
|
ProcedureRequest.id
|
QDM matched to QI Core / FHIR
|
| Source
|
ProcedureRequest.requester
|
Author, orderer - note also, ProcedureRequest.requester.agent for device, practitioner or organization who initiated the request; or ProcedureRequest.requester.onBehalfOf - the organization the device or practitioner was acting on behalf of
|
Intervention, Recommended
| QDM Attribute
|
QI Core Metadata Element
|
Comment
|
| Intervention, Recommended
|
ProcedureRequest.intent
|
Procedure Request intent uses the concepts proposal, plan, order, original-order, reflex-order, filler-order, instance-order, option. "Proposal" is most consistent with the ProcedureRequest when applied to clinical decision support (CDS) in which the CDS proposes an action to a provider or to a patient. The QDM concept Recommended addresses expectations a provider gives to a patient. Such recommendations are most consistent with the ProcedureRequest.intent value of "plan" (an intension to ensure something occurs without providing an authorization to act).
|
| Negation Rationale
|
ProcedureRequest.extension (http://hl7.org/fhir/StructureDefinition/procedurerequest-reasonRefused)
|
QDM matched to QI Core / FHIR
|
| Reason
|
ProcedureRequest.reasonCode
|
QDM matched to QI Core / FHIR
|
| Author dateTime
|
ProcedureRequest.AuthoredOn
|
Note - ProcedureRequest.occurrence(x) defines a dateTime when the event should occur - not addressed in QDM
|
| Code
|
ProcedureRequest.code
|
QDM matched to QI Core / FHIR
|
| id
|
ProcedureRequest.id
|
QDM matched to QI Core / FHIR
|
| Source
|
ProcedureRequest.requester
|
Author, orderer - note also, ProcedureRequest.requester.agent for device, practitioner or organization who initiated the request; or ProcedureRequest.requester.onBehalfOf - the organization the device or practitioner was acting on behalf of
|
Intervention, Performed
| QDM Attribute
|
QI Core Metadata Element
|
Comment
|
| Intervention, Performed
|
Procedure (the .status metadata allows conformance to the specific QDM datatype context)
|
QDM matched to QI Core / FHIR
|
| Relevant Period
|
Procedure.performed[x]
|
QDM matched to QI Core / FHIR
|
| Negation Rationale
|
Procedure.notDoneReason
|
QDM matched to QI Core / FHIR
|
| Reason
|
Procedure.reasonCode
|
QDM matched to QI Core / FHIR
|
| Result
|
Procedure.outcome
|
QDM matched to QI Core / FHIR
|
| Author dateTime
|
FHIR.provenance.recorded
|
FHIR references authorDatetime as part of the provenance resource for all resources. Is authorDatetime still appropriate for this datatype?
|
| Status
|
Procedure.status
|
QDM matched to QI Core / FHIR
|
| Code
|
Procedure.code
|
QDM matched to QI Core / FHIR
|
| id
|
Procedure.id
|
QDM matched to QI Core / FHIR
|
| Source
|
Procedure.performer
|
QDM matched to QI Core / FHIR
|
Intervention, Order [Using Task]
| QDM Attribute
|
QI Core Metadata Element
|
Comment
|
| Intervention, Order
|
Task.intent
|
Task intent uses the concepts proposal, plan, order, original-order, reflex-order, filler-order, instance-order, option. Constrain to "order" from the intent value set for QDM datatypes with the order context.
|
| Negation Rationale
|
.
|
FHIR Task Resource does not address notDoneReason
|
| Reason
|
Task.reason
|
QDM matched to QI Core / FHIR
|
| Author dateTime
|
Task.AuthoredOn
|
QDM matched to QI Core / FHIR
|
| Code
|
Task.code
|
QDM matched to QI Core / FHIR
|
| id
|
Task.id
|
QDM matched to QI Core / FHIR
|
| Source
|
Task.requester
|
Task also provides the opportunity to request Task.owner (the person responsible for the task) and task.performerType
|
Intervention, Recommended [Using Task]
| QDM Attribute
|
QI Core Metadata Element
|
Comment
|
| Intervention, Order
|
Task.intent
|
Task intent uses the concepts proposal, plan, order, original-order, reflex-order, filler-order, instance-order, option. Constrain to "plan" from the intent value set for QDM datatypes with the recommended context.
|
| Negation Rationale
|
.
|
FHIR Task Resource does not address notDoneReason
|
| Reason
|
Task.reason
|
QDM matched to QI Core / FHIR
|
| Author dateTime
|
Task.AuthoredOn
|
QDM matched to QI Core / FHIR
|
| Code
|
Task.code
|
QDM matched to QI Core / FHIR
|
| id
|
Task.id
|
QDM matched to QI Core / FHIR
|
| Source
|
Task.requester
|
Task also provides the opportunity to request Task.owner (the person responsible for the task) and task.performerType
|
Intervention, Performed [Using Task]
| QDM Attribute
|
QI Core Metadata Element
|
Comment
|
| Intervention, Performed
|
Task (the .status metadata allows conformance to the specific QDM datatype context)
|
QDM matched to QI Core / FHIR
|
| Relevant Period
|
Task.executionPeriod
|
QDM matched to QI Core / FHIR
|
| Negation Rationale
|
.
|
FHIR Task Resource does not address notDoneReason
|
| Reason
|
Task.reason
|
QDM matched to QI Core / FHIR
|
| Result
|
Task.output.value[x]
|
QDM matched to QI Core / FHIR
|
| Author dateTime
|
Task.authoredOn
|
QDM matched to QI Core / FHIR
|
| Status
|
Task.status
|
QDM matched to QI Core / FHIR
|
| Code
|
Task.code
|
QDM matched to QI Core / FHIR
|
| id
|
Task.id
|
QDM matched to QI Core / FHIR
|
| Source
|
Task.requester
|
Task also provides the opportunity to request Task.owner (the person responsible for the task) and task.performerType
|
